Safety Ever.........Fire Never.......
The Spring Type Escape Chute is a device b which persons in immediate danger, can activate the escape chute, and use it to evacuate indoor in high building
The Escape Chute System consists of two major components:
1. Is the storage/deployment device, which will change to suit the circumstances in which the chute is to be used.
2. Is the Escape Chute its self, the only change to occur on the chute is its length, to suit the application
The Chute is manufactured in three distinct and separate layers, each layer can be separated from the other to perform maintenance or carry out repairs
Layer 1: The Outside Layer-Flameproof Layer
Is there to protect you from the flames and radiated hear, this layer can withstand a constant temperature of 600 Deg”C”
There is a space between the outer and middle layer, this reduces the radiated heat being transferred to the middle chute.
Layer 2: The Middle Layer-Breaking Layer
This layer has a series of stainless steel coiled springs sewn into the material, these springs have a small diameter, so as you travel through them they restrict you, but will not hold you.
For that you have to place pressure on the wall with your leg’s and arms, the more pressure, the more you low right down, less pressure and you speed up.
Layer 3: The Inner Layer-Support layer
This is the layer that is connected to the storage/deployment device, and holds the chute in place
The Spring Type Escape Chute have 3 layer-spring type escape chute is a device that allows the safe mass evacuation of any large structure, at a rate of up to 25 people per minute. Just sit on the edge, with your legs in the chute, and feel it grip you, slide forward and lower yourself to waist level, spread your legs, and slowly lower yourself fully into the chute. By Applying and releasing pressure against the interior wall of the chute, with your arms and legs, you have control of your decent speed.